Filter
Top Products
EKI-7758F User Manual 38
3.2 Web Browser
EKI-7758F provides a convenient configure way via web browser, you can follow below step to access
EKI-7758F.
EKI-7758F’s default IP is 192.168.1.1, make sure your host PC and EKI-7758F are on the same logical
sub-network.
Warning Your host PC should be in the same VLAN setting with EKI-7758F, or the
management will not be configured.
Connect EKI-7758F to the Ethernet then your host PC could configure it via Ethernet. Or you can directly
connect EKI-7758F to your host PC with a straight-through or cross over Ethernet cable.
Before to use web management, install the industrial switch on the network and make sure that any one
of PC on the network can connect with the industrial switch through the web browser. The industrial
switch default value of IP, subnet mask, username and password is as below:
• IP Address: 192.168.1.1
• Subnet Mask: 255.255.255.0
• Default Gateway: 192.168.1.254
• User Name: admin
• Password: admin
Open Internet Explorer and type EKI-7758F’s IP in the Address field then press Enter to open the web
login page.
Figure 3.5: Type the address in the URL
Figure 3.6: Web Login Window
Default user name and password are both admin, fill in the user name and password then press OK to
enter the configuration. You can change the password in the system setting.