Advantech EKI-7758F Switch User Manual


 
111
Security: when its state is “On” that means this port accepts only one MAC address.
Click ‘Apply’ button to apply the configuration.
Figure C.33: Port Control
C.2.3 Port Status
In Port Status, you can view every port status that depends on user setting and the
negotiation result.
Figure C.34: Port Status
Port No.: select the port that you want to configure.
State: current port status. The port can be set to disable or enable mode. If the port
setting is disable then will not receive or transmit any packet.
Speed/Duplex: set the port link speed.
Duplex: set full-duplex or half-duplex mode of the port.
Flow Control: set flow control function is Symmetric or Asymmetric in Full Duplex
mode. The default value is Symmetric.
Security: when its state is “On” that means this port accepts only one MAC address.