Filter
Top Products
1 Installing and Configuring the 82350
16 82350B Installation and Configuration Guide
If Connection Expert is not already running, run
it now to verify your I/O configuration: In the
Windows Notification area, click the IO icon
( ), then click Agilent Connection Expert.
a Locate your interfaces and instruments in the
Explorer Pane. Click on them to see their
properties (displayed in the right-hand pane).
Observe their state, also displayed in the
right-hand pane: if communication to the
interface or instrument has been successfully
established, it will be in the Verified state,
denoted by a green check mark.
b Change the default I/O configuration (if neces-
sary) by clicking Change Properties... in the
property pane of the interface or instrument
you wish to configure.
c If you would like to test your connections
manually, select your instrument, right-click
and choose Send Commands To This Instru-
ment.
NOTE
If you plan to program your GPIB instruments using the Agilent
488 API, or to run NI-488.2–compatible programs with Agilent
interface hardware (such as GPIB cards), you may need to
enable the Agilent 488 library. To do this, click Tools > Agilent
488..., then select the check box labeled Enable Agilent GPIB
cards for 488 programs.