Filter
Top Products
Installing and Configuring the 82350 1
82350B Installation and Configuration Guide 21
2 Connect GPIB Cables to the 82350. Connect a
separate GPIB cable to each installed 82350.
Tighten the GPIB connector screws finger-tight
only. (The screwdriver slots are for removal
purposes only.) Two examples follow showing
how to connect a single GPIB instrument or how
to connect multiple GPIB instruments.
For information or to purchase Agilent GPIB
cables, see www.agilent.com/find/io
Example: Connecting a single GPIB instrument
Figure 1-8 shows connections from a single GPIB
instrument to the GPIB connector of an 82350
installed in your PC. You may want to record the
primary GPIB address of the attached instrument
for future programming use. After making the
connections, reconnect the PC power cord and
apply power to the PC and to attached
peripherals/instruments.
Figure 1-8 Connecting a single GPIB instrument
CAUTIONCAUTION
To avoid damage to the connectors, only finger-tighten the
connectors.
GPIB Cable
GPIB Connector. Connect to
GPIB port on GPIB Instrument.
GPIB Connector. Connect to GPIB
connector on 82350 GPIB Interface
Card installed in PC.
PC
Instrument