Filter
Top Products
1 Installing and Configuring the 82350
18 82350B Installation and Configuration Guide
cover from the PC to allow access to the I/O
slots. See your PC documentation for
instructions.
Figure 1-4 Remove the PC cover
3 Remove a Cover Plate. Remove one of the PC
back panel cover plates. The 82350B is a 5V PCI
card and will not fit in a 3.3V PCIe slot or in an
EISA or ISA slot. Choose a 5V PCI slot that will
give adequate clearance for the GPIB connector.
Figure 1-5 Remove the card slot
4 Install the 82350. Insert the 82350 Interface
Card edge connector into the PCI expansion slot
connector of the PC. Make sure the interface is
fully seated by pushing firmly on the top edge of
the card with the palm of your hand. The GPIB
NOTE
Take precautions against static discharge when handling and
installing cards.