Filter
Top Products
Troubleshooting Guidelines 2
82350B Installation and Configuration Guide 47
• Clicking Exit. Clicking the blue IO icon and
then clicking Exit causes a dialog box to
appear that asks you if you want to terminate
the Agilent IO Control. Clicking Yes hides the
blue IO icon and deactivates the IO Control.
If the blue IO icon is not displayed, either the blue
IO icon display has been turned off and/or the IO
Control (and associated iprocsvr.exe) is not active.
In this case, click Start | Programs | Agilent IO
Libraries Suite | Utilities | IO Control to re-start
the IO Control and to display the blue circled IO
icon.
Install IO Libraries Suite (if 82350 was installed
first)
If you installed the 82350 before installing the
Agilent IO Libraries Suite software, follow these
steps to install and configure the IO Libraries Suite
and the necessary drivers for your card.
1 Install the Agilent IO Libraries Suite as
described in “Step 2: Installing the Agilent IO
Libraries Suite" on page 7 of this manual.
2 If the Connection Expert utility does not
recognize your 82350 and display it as a PCI
GPIB Interface, you may need to use Windows
Device Manager to associate the correct drivers
with your card. Follow the steps for your
operating system: