Filter
Top Products
Configuring AMF
Page 24 | How to Configure and Use AMF on Allied Telesis Switches
Member4#copy running-config startup-config
Building configuration...
[OK]
Member4#reload
reboot system? (y/n): y
Verifying the AMF network
To check that all nodes have joined the AMF network use the show atmf summary
command, which can be executed from any node in the AMF network:
The Current ATMF Nodes field in the output above shows that all 5 nodes have joined the
AMF network.
Use the show atmf nodes command to check information on individual nodes:
Note: The Parent field refers to the parent domain and not the upstream device. In the
example output above, Member2 is the domain controller for the parent domain for
Member3 and Member4.
7. Save the configuration and reboot the switch.
AMF_Master#show atmf summary
ATMF Summary Information:
ATMF Status : Enabled
Network Name : atmf1
Node Name : AMF_Master
Role : Master
Current ATMF Nodes : 5
AMF_Master#
AMF_Master#show atmf nodes
Node Information:
* = Local device
SC = Switch Configuration:
C = Chassis S = Stackable N = Standalone
Node Device ATMF Node
Name Type Master SC Parent Depth
---------------------------------------------------------------------
* AMF_Master AT-SBx81CFC400 Y C none 0
Member1 SwitchBlade x908 N S AMF_Master 1
Member2 SwitchBlade x908 N S AMF_Master 1
Member4 x510-52GTX N S Member2 2
Member3 x510-52GTX N S Member2 2
Current ATMF node count 5