Filter
Top Products
AMF Commands
AMF Software Reference Supplement for Allied Telesis x-Series Switches
54 AlliedWare Plus
TM
Operating System - Software Version 5.4.3-1.4 and later C613-50031-01 REV B
atmf backup enable
This command enables automatic AMF backups on the AMF master node. By default,
automatic backup starts at 3:00 AM, but this schedule can be changed by the atmf
backup command on page 53. Note that backups are initiated and stored on the master
nodes.
The no variant of this command will disable any amf backups that have been scheduled
and previously enabled.
Syntax atmf backup enable
no atmf backup enable
Default
Automatic AMF backup functionality is enabled on the AMF master when it is configured
and external media, i.e. an SD card or a USB storage device, is detected.
Mode Global Configuration
Usage A warning message will appear if you run the atmf backup enable command with either
insufficient or marginal memory availability on your external storage device.
You can use the show atmf backup command on page 85 to check the amount of space
available on your external storage device.
Examples To turn on automatic AMF backup, use the following command:
Related Commands show atmf
show atmf backup
atmf backup
atmf backup now
atmf enable
Parameter Description
backup The AMF backup process
enable Enables AMF backup to external media
VCF_1#
configure terminal
VCF_1(config)#
atmf backup enable