Filter
Top Products
AMF Commands
AMF Software Reference Supplement for Allied Telesis x-Series Switches
C613-50031-01 REV B AlliedWare Plus
TM
Operating System - Software Version 5.4.3-1.4 and later 93
show atmf links detail
By default, the following commands display various levels of detail about all the AMF links
configured on the device and also display detailed statistics about the AMF packet
exchanges between the devices.
It is also possible to display the AMF link configuration and packet exchange statistics for a
specified interface.
Syntax show atmf links detail
Mode User Exec.
Example To display the AMF link details use this command
The output from this command will display all the internal data held for ATMF links.
Parameter Description
links AMF links
brief Brief summary of AMF links configuration and status
detail Detailed AMF links information
node_1#
show atmf links detail
Figure 1-13: Sample output from the show atmf links detail command.
ATMF Links Detail:
Port : sa1
Ifindex : 4501
VR ID : 0
Port Status : Up
Port State : Full
Port BPDU Receive Count : 44441
Adjacent Node Name : Building_2
Adjacent Ifindex : 4501
Adjacent VR ID : 0
Adjacent MAC : 0014.2299.137d
Port Last Message Response : 0