Filter
Top Products
AMF Commands
AMF Software Reference Supplement for Allied Telesis x-Series Switches
78 AlliedWare Plus
TM
Operating System - Software Version 5.4.3-1.4 and later C613-50031-01 REV B
debug atmf
This command enables the AMF debugging facilities, and displays information that is
relevant (only) to the current node. The detail of the debugging displayed depends on the
parameters specified.
If no additional parameters are specified, then the command output will display all AMF
debugging information, including link events, topology discovery messages and all
notable AMF events.
The “no” variant of this command disables either all AMF debugging information, or only
the particular information as selected by the command’s parameters.
Syntax debug atmf [all|crosslink|database|link|neighbor|packet]
no debug atmf [all|crosslink|database|link|neighbor|packet]
Default
All debugging facilities are disabled.
Mode User Exec and Global Configuration
Usage If no additional parameters are specified, then the command output will display all AMF
debugging information, including link events, topology discovery messages and all
notable AMF events.
Example To debug all AMF debugging, use the command:
To debug all AMF link debugging, use the command:
To debug all AMF facilities, use the command:
Parameter Description
debug Enables the AMF debugging facility.
all Output displays all events.
crosslink Output displays all crosslink information.
database Output displays only notable database events
link Output displays debugging information relating to uplink or
downlink information.
neighbor Output displays only notable AMF neighbor events
packet Output displays only notable AMF packet events
Note
An alias to the no variant of this command - undebug atmf - exists
elsewhere in this chapter.
node_1#
debug atmf
node_1#
debug atmf link
node_1#
debug atmf all