Filter
Top Products
Using the unified CLI with working-sets
Page 40 | How to Configure and Use AMF on Allied Telesis Switches
User-defined working-set groups
In addition to the automatic working-set groups, it is also possible to create user-defined
groups for arbitrary sets of nodes that the user may wish to group together. For example, all
AMF master nodes.
To create and use a user-defined working-set group:
1. Create a working-set containing the desired nodes.
2. In global configuration mode use the command: atmf group <group-name>
Master#atmf working-set Master1,Master2
===================
Master1, Master2:
===================
Working set join
atmf1[2]#conf t
atmf1[2](config)#atmf group Masters
You can see all user-defined working-set groups that exist on the AMF network with the
command show atmf group members user-defined
Master1#show atmf group members user-defined
Retrieving User-defined groups from:
x510_1 Master1, Master2, x908_VCS_2 x908_VCS_1
ATMF Group membership
User-defined Total
Groups Members Members
---------------------------------------------------------------------
Masters 2 Master1 Master2
Master#