Filter
Top Products
Overview
InfraStruXure Power Generation System 31
Navigating through screens
To open any screen, press the Up or Down arrow until the selector (
rests next to your desired
selection. Press
ENTER to view the selected screen.
When configuring settings, press the Up or Down arrows until the
selector (
rests next to the setting you want to change, and then
press
ENTER. If the setting is a list of choices, an input arrow (
will appear next to the setting. Press the Up or Down arrow until
your desired change appears. Press
ENTER to select the setting.
On some screens, continue arrows (
indicate there are
additional screens to view in the category. Press the Up or
Down arrow to view these additional screens.
Password-protected screens
When configuring or changing settings, the display interface prompts you for your password. To
enter your password:
1. Press the Up or Down arrow until the correct letter is
displayed, and then press
ENTER.
2. Press
ENTER twice after entering your password.
Contacts In: 02of04
Name: User Switch #2
Normal: Open
Status: Open
Load-Meter
ATS/Voltage
Generator
Testing
Stats
Alarms
Config
Help
Contacts In: 02of04
Name: User Switch #2
Normal: Open
Status: Open
System/Network
Electrical Configuration
Panel Configuration
Manufacturer Data
Product Data
Factory Defaults
Firmware Updates
Note
After pressing ENTER, the character you entered is
displayed as an asterisk and the input arrow
moves to the next space. Select the next
password character and then
ENTER, etc.
See “System Password” on page 45 to change your password.
Enter Password:
*******