Filter
Top Products
iv InfraStruXure System—Installation and Start-Up
Installation Procedures .......................................... 18
Installation Procedures .......................................... 19
Level the PDU, UPS, RDP, NetShelter and Battery Enclosures . . 19
Exchange Side Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Attach the PDU, UPS, and Battery Enclosure . . . . . . . . . . . . . . 22
Ensure that All Power is Off . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Connect Utility Conductors to the PDU . . . . . . . . . . . . . . . . . . 25
Connect AC Power and Control Wiring . . . . . . . . . . . . . . . . . . 26
Connect DC Power Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Cascade Battery Enclosures . . . . . . . . . . . . . . . . . . . . . . . 31
Connect power cables from the
Battery Enclosure to the Symmetra PX UPS
. . . . . . . . . . . . . 32
Connect an Emergency Power Off Switch . . . . . . . . . . . . . . . . 33
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Connect an EPO switch to the
user connection plate and test the switch
. . . . . . . . . . . . . . 34
Safety warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Connect User Input Contacts and
Relay Outputs to the User Connection Plate. . . . . . . . . . . . . . . 37
Install Shielding Troughs,
Shielding Partitions, and Cable Ladders . . . . . . . . . . . . . . . . . . 39
Shielding Troughs and Shielding Partitions
for overhead wiring along rows
. . . . . . . . . . . . . . . . . . . . 39
Cable Ladders for overhead wiring across rows . . . . . . . . . . 40
Install InfraStruXure Rack-Mount Devices . . . . . . . . . . . . . . . . . 41
Install the Rack Automatic Transfer Switches (ATS) . . . . . . . . 41
Install the Rack Power Distribution Units (PDU) . . . . . . . . . . 41
Install the InfraStruXure Manager and Hub (or Switch) . . . . . 41
Install the Environmental Monitoring Unit or
Environmental Management System
. . . . . . . . . . . . . . . . . 41
Route and Attach Overhead Wiring . . . . . . . . . . . . . . . . . . . . . 42
Connect the sub-feed power cable conductors to a
three-pole breaker on the PDU
. . . . . . . . . . . . . . . . . . . . . 42
Route and attach power cables to equipment racks . . . . . . . 43