Filter
Top Products
MX28B200/400 –48 VDC User’s Manual (990-9133) Page 29
PARAMETER NAME/
[MENU LOCATION]
DESCRIPTION DISPLAY SCREENS /
DEFAULT SETTINGS
Battery Discharge Alarm
Security Level {1}
[BATT/SET-ALM]
The output relay energized if the battery
discharge current exceeds the
programmed battery discharge threshold.
Batt Disc Alm m+
Minor
Battery Discharge Threshold
Security Level {1}
[BATT/SET-ALM]
An alarm is generated if the battery
discharge current exceeds this value.
Batt Disc Thr m+
10 A
Battery Float Voltage
Security Level {1}
[BATT/PARAM]
One of three parameters that control the
DC output voltage. Set the Float Voltage
at 25°C battery temperature per the
battery manufacturers recommendations.
Batt Float m+
-54.00 V
Battery High Temperature
Alarm
Security Level {1}
[BATT/SET-ALM]
The output relay energized if the battery
temperature exceeds the Battery High
Temperature threshold.
Batt HT Alm m+
Minor
Battery High Temperature
Threshold
Security Level {1}
[BATT/SET-ALM]
Battery Temperature is temperature
measured at the battery probe. An alarm
is generated if the battery temperature
exceeds this value.
Batt HT Thr m+
70.0 C
Battery High Voltage Alarm
Security Level {1}
[BATT/SET-ALM]
The output relay energized if the DC
output voltage rises above the battery
high voltage threshold.
Batt HV Alm m+
Minor
Battery High Voltage Threshold
Security Level {1}
[BATT/SET-ALM]
An alarm will be reported if temperature
is lower than the temperature entered.
An alarm is generated if the DC output
voltage rises above this value.
Batt HV Thr m+
-58.00 V
Battery Low Temperature
Alarm
Security Level {1}
[BATT/SET-ALM]
The output relay energized if the Battery
Temperature drops below the battery
Low Temperature threshold.
Batt LT Alm m+
Minor
Battery Low Temperature
Threshold Security Level {1}
[BATT/SET-ALM]
Battery Temperature is temperature
measured at the battery probe. An alarm
is generated if the battery temperature
drops below this value.
Batt LT Thr m+
0.0 C
Battery Low Voltage Alarm
Security Level {1}
[BATT/SET-ALM]
The output relay energized if the DC
output voltage drops below the battery
low voltage threshold.
Batt LV Alm m+
Minor
Battery Low Voltage Threshold
Security Level {1}
[BATT/SET-ALM]
An alarm is generated if the DC output
voltage drops below this value.
Batt LV Thr m+
-44.00 V
Battery Maximum Recharge
Current
Security Level {1}
[BATT/PARAM]
One of three parameters that control the
DC output voltage. If Battery Current
surpasses the Maximum Battery
Recharge Current, the DC output voltage
will be reduced (the system limits the
charging current to this programmable
value).
Batt Max Rechm+
12 A
Battery Temperature
{Status Only}
[STATUS]
Battery temperature measured by the
system controller at the optional battery
temperature sensor probe.
Batt Temp +
25.2 C