Filter
Top Products
20 60kW InfraStruXure PDU—Operation and Configuration
Config Screen
System/Network
Use this option of the Config screen to access these options:
System Password • Password: Change the system password required to access
protected screens and fields in the display interface. Enter a
string of up to eight alphanumeric characters, followed by the
underline character (
_) to indicate the end of the string. By
default, no password is required.
• Time-out: Set the time that the display interface waits for user
input before it reverts to the initial scrolling of status screens.
Select 1, 2, 5, 10 (the default), or 30 minutes; or 1, 2, or 4 hours,
or Forever.
• Invalidate NOW: Re-enter the system password for viewing
password-protected screens.
Date/Time • Date: Set in the following format: dd-mmm yyyy.
• Time: Set in the following format: hh:mm:ss.
Local Interface • Contrast: Set the screen contrast for the LCD. Select from 1
(high contrast) to 8 (low contrast).
• Key Click: Choose On for an audible click whenever you press
a navigation key. Choose Off to disable the key click.
• Beeper: Select High, Medium, Low, or Off to adjust the
loudness of the audible beeper and the key click.
Network Address The following values are set by the Information Controller during
initial configuration:
• IP: The System IP address, which the domain name server
translates into a domain name.
• Mask: The subnet mask, which identifies the subnetwork on
which the PDU operates.
• GW: The Gateway address. This is the physical address of the
PDU, expressed as a 48-bit hexadecimal number.