Filter
Top Products
Configuring Client TCP/IP
9
CONFIGURING CLIENT TCP/IP
If TCP/IP protocols have not previously been installed on the client PCs,
refer to the following section. For information on how to configure a TCP/
IP address on a PC, refer to “Setting Up TCP/IP”.
Installing TCP/IP
Windows 95/98/Me/NT
1. Click Start/Settings/Control Panel.
2. Double-click the Network icon and select the Configuration tab in
the Network screen (Figure 4).
3. Click the Add button.
4. Double-click the Protocol icon.
Figure 4. Windows 95/98/Me/NT
Select Network Component Type
Screen