Filter
Top Products
Configuring the Wireless Mobile Router
48
Wireless
To configure the Wireless Mobile Router as a wireless access point for
wireless clients (either stationary or roaming), all you need to do is
define the radio channel, the Service Set Identifier (SSID), and
encryption options (Figure 43 - Note: The figures not numbered on the
following page are provided to show better details of the fields on this
screen).
Channel and SSID
You must specify a common radio channel and SSID (Service Set ID)
to be used by the Wireless Mobile Router and all of your wireless
clients. Be sure you configure all of your clients to the same values.
SSID: This should be set to the same value as other wireless devices in
the network. (Default: apc)
Note: The SSID is case sensitive and can consist of up to 32
alphanumeric characters.
Figure 43. Channel and SSID Setup Screen