Filter
Top Products
Configuring the Wireless Mobile Router
42
If you are unsure of which PC was originally set up by the broadband
technician, call your ISP and request they register a new MAC address
for your account. Register the default MAC address of the Wireless
Mobile Router.
Point-to-Point Over Ethernet (PPPoE)
Enter the PPPoE User Name and Password assigned by your Service
Provider (see Figure 37). The Service Name is normally optional, but
may be required by some service providers.
The MTU (Maximum Transmission Unit) governs the maximum size of
the data packets. Leave this at the default value (1492) unless you
have a particular reason to change it.
Enter a Maximum Idle Time (in minutes) to define a maximum period
of time for which the Internet connection is maintained during inactivity. If
the connection is inactive for longer than the Maximum Idle Time, it will
be dropped. (Default: 0 minute)
Enable the Auto-reconnect option to automatically re-establish the
connection as soon as you attempt to access the internet again.
Figure 37. Point-to-Point Over Ethernet
(PPPoE)Setup Screen