Filter
Top Products
Advanced Setup
37
Advanced Setup
Use the web management interface to define system parameters,
manage and control the Wireless Mobile Router and its ports, or monitor
network conditions. The Table 3 outlines the selections available from
this program.
Table 3. Advanced Setup Features
Menu Description
System Sets the local time zone, the password for administrator access,
and the IP address of a PC that will be allowed to manage the
Wireless Mobile Router remotely.
WAN Specifies the Internet connection type:
• Dynamic IP host configuration and the physical MAC address of
each media interface
• PPPoE configuration
•PPTP
• Static IP and ISP gateway address
• BigPond (Internet service available in Australia)
• Specifies DNS servers to use for domain name resolution.
LAN Sets the TCP/IP configuration of the Wireless Mobile Router’s LAN
interface and all DHCP clients.
Wireless Configures the radio frequency, SSID, and encryption for wireless
communications.
NAT Shares a single ISP account with multiple users, sets up virtual
servers.
Firewall Configures a variety of security and specialized functions,
including: Access Control, Hacker Prevention, and DMZ.
DDNS Dynamic DNS provides users on the Internet with a method to tie
their domain name(s) to computers or servers.
UPnP With Universal Plug and Play, a device can automatically
dynamically join a network, obtain an IP address, communicate its
capabilities, and learn about the presence and capabilities of other
devices. Devices can then directly communicate with each other.
This further enables peer-to-peer networking.
Tools Contains options to backup & restore the current configuration,
restore all configuration settings to the factory defaults, update
system firmware, or reset the system.
Status Provides WAN connection type and status, firmware and hardware
version numbers, system IP settings, as well as DHCP, NAT, and
Firewall information.
Displays the number of attached clients, the firmware versions, the
physical MAC address for each media interface, and the hardware
version and serial number.
Shows the security and DHCP client log.