Filter
Top Products
Setting Up TCP/IP
21
Configuring Your Computer in Windows XP
DHCP IP Configuration
The following instructions assume you are running Windows XP with the
default interface. If using the Classic interface (where the icons and
menus look like previous Windows versions), please follow the
instructions for Windows 2000.
1. Access Network settings
by clicking Start/Control
Panel, select Network
and Internet
Connections. Click on
the Network
Connections icon.
2. Double-click the Local
Area Connection icon
for the Ethernet adapter
connected to the Wireless
Mobile Router. Click the
Properties button.
Figure 17. Local Area Connection
2 Status Screen
3.
In the Local Area Connection Properties box, verify the box next
to Internet Protocol (TCP/IP) is checked. Highlight Internet
Protocol (TCP/IP); click the Properties button.
4. Select Obtain an IP address automatically to configure your
computer for DHCP. Click the OK button to save this change and
close the Properties window.
5. Click the OK button again to save these new changes.
6. Reboot the PC.