Filter
Top Products
Configuring Client TCP/IP
24
Manual IP Configuration (for all Windows OS)
The instructions here may not exactly match your version of Windows as
these steps and screenshots were created in Windows 98. The setup
steps of Manual IP Configuration in Windows 95, Windows Me, Windows
NT, and Windows 2000, are similar, but not identical, to Windows 98.
1. Check Specify an IP
address on the IP Address
tab. Enter an IP address
based on the default
network 192.168.2.x (where
x is
between 2 and 254), and
use
255.255.255.0
for the
Subnet mask (Figure 21).
Figure 21. TCP/IP Properties
Screen