Filter
Top Products
Advanced Setup
41
WAN
Specify the WAN connection type provided by your Internet Service
Provider, then click More Configuration to enter detailed configuration
parameters for the selected connection type.
Dynamic IP
When setting up a Dynamic IP address (Figure 36), the Host Name is
optional, but may be required by some ISPs. The default MAC address
is set to the WAN’s physical interface on the Wireless Mobile Router. Use
this address when registering for internet service, and do not change it
unless required by the ISP. If the ISP used the MAC address of an
ethernet card as an identifier when first setting up your broadband
account, only connect the PC with the registered MAC address to the
Wireless Mobile Router and click the Clone MAC Address button. This
will replace the current Wireless Mobile Router MAC address with the
already registered Ethernet card MAC address.
Figure 36. Dynamic IP Setup Screen