Filter
Top Products
Configuring Client TCP/IP
20
Configuring Your Computer in Windows 2000
DHCP IP Configuration
1. Access Network settings by clicking Start/Settings/Control Panel.
2. Double-click the Network and Dial-up Connections icon.
3. Double-click the Local Area
Connection icon for the
ethernet adapter connected to
the Wireless Mobile Router.
When the Status dialog box
screen (Figure 16), click the
Properties button.
4. In the Local Area Connection
Properties box, verify the box
next to Internet Protocol
(TCP/IP) is checked. Highlight
Internet Protocol (TCP/IP),
and click the Properties
button.
Figure 16. Local Area
Connection 1 Status Screen
5.
Select Obtain an IP address automatically to configure your
computer for DHCP. Click the OK button to save this change and
close the Properties screen.
6. Click the OK button again to save these new changes.
7. Reboot the PC.
8. To obtain new network settings see “Obtain IP Settings from Your
Wireless Mobile Router”.