Filter
Top Products
26
SCREEN BLANK
Choices: NONE, 6, 12, 20, 30, 60, 120, 180, 300
This is the amount of time that the VSI-Pro text display will remain on-screen after a transaction before blanking itself
off (not the video picture, just the register transaction data) until the next transaction.
To change the SCREEN BLANK setting, press the “Up” or “Down” button to move the cursor to “SCREEN BLANK”
and press “SET”. The cursor will begin flashing. Press the “Up” or “Down” buttons to cycle through the selections.
Press “Set” when the desired time is displayed. The cursor will stop flashing and you may continue programming.
DISPLAY LINES
You have the choice of how many lines of text to display on-screen for register transactions. The choices are up to
11 lines.
To change the DISPLAY LINES setting, press the “Up” or “Down” button to move the cursor to “DISPLAY LINES” and
press “Set”. The cursor will begin flashing. Press the “Up” or “Down” buttons to cycle through the selections. Press
“Set” when the desired number is displayed. The cursor will stop flashing and you may continue programming.
DISPLAY FORMAT
If “TOP” is selected which is the default, the data scrolls from the top most line down to the selected number of lines
displayed. “T/D” and/or “TITLE” is displayed at the top of the screen. If “BOTTOM” is selected then the data scrolls
up from the bottom most line to the top of the screen and “T/D” and/or “TITLE” is displayed at the bottom of the
screen.
VSI-Pro VIDEO SERIAL INTERFACE
NOTE ?
If you are using an on-screen title, it will occupy Line 1, leaving 10 lines for the text
insertion. If you enable the on-screen Time/Date then this takes one additional line also.
NOTE ?
All register transaction data will scroll up regardless of the number of lines you choose
to display on-screen and the more lines you display on-screen, the greater the amount
of time that the transaction data will be recorded. However, some applications may limit
the number of lines and the size of the on-screen display.
NOTE ?
Choosing “NONE” means No Blanking. The VSI-Pro will display the last transaction
until a new transaction is performed.
PROGRAMMING