Filter
Top Products
42
VSI-Pro VIDEO SERIAL INTERFACE
EXIT
Press the “Up” or “Down” button to move the cursor to “EXIT” and press “Set” to return to the previous menu.
5.9 TEST/DEMO MODE
The TEST/DEMO MODE provides you with several ways to test the VSI-Pro and demonstrate its capabilities as a
cash register interface. Press the “Up” or “Down” button to move the cursor to “TEST/DEMO MODE” and press “Set”.
The following sub-menu will appear:
Figure 69: TEST/DEMO MODE Sub-Menu
PORT 1 TEST
DATA CAPTURE
REGISTER DEMO
VERSION ID
EXIT
Figure 68: Triggered Text Main-Menu
OUTPUT TEXT
Choices: ON, OFF
Press the “Up” or “Down” button to move the cursor to “OUTPUT TEXT” and press “Set”. The cursor will start
flashing. Press the “Up” or “Down” button to cycle through the values and press “Set” when the desired value is
displayed. Selecting “OFF” will not send any exception text to the serial printer.
SET TRIGGERED TEXT
Press the “Up” or “Down” button to move the cursor to “SET TRIGGERED TEXT” and press “Set”. The following sub-
menu will appear:
You can enter 2 lines with 40 alpha numeric text on each line. You can also enter non-printable data (control code)
instead of triggered text. Each control code occupies 3 charactors, therefore you can enter 13 control codes in a line.
To enter control code, first print up arrow ^ follwed by 2 hex digit. For example, hex code 01 has to be entered like ^
01.
Press “Up” and “Down” simultaneously to exit..
DISPLAY TEXT OFF
OUTPUT TEXT OFF
SET TRIGGERED TEXT
EXIT
PROGRAMMING