Filter
Top Products
73
VSI-Pro VIDEO SERIAL INTERFACE
If you have difficulty entering the main-menu or you changed EPROMS in your VSI-Pro, do the following procedure
exactly: Lightly press and hold in the 3 buttons to the left (“Up”, “Down” & “Set”). While holding down these buttons,
press and release the “Reset” button. Then release the other buttons. Wait a few seconds and the copyright notice
will appear on-screen along with the version of software installed in your VSI-Pro.
Upon powering up the VSI-Pro for the first time, if the battery is depleted the master reset should be done. However
in some cases the Time/Date display may not have the correct or legible characters. If this occurs, go to the Clock
programming section of the menu and reset the clock and program the correct time. The Time/Date display will then
function properly and any subsequent master resets will not affect the time.
WARNING!
DOING A MASTER RESET CLEARS ALL PROGRAMMING AND
THE VSI-PRO DEFAULTS TO THE FACTORY SETTINGS.
MASTER RESET APPENDIX L
NOTES