Filter
Top Products
Accessories
13
MVP-5200i Modero Viewpoint Widescreen Touch Panel
Unlocking the touch panel
Once placed within the Wall Charging Station, the MVP-5200i remains secured until the user unlocks it.
A ten-second lag betwen the touch panel being placed in the Wall Charging Station and thesecurity
feature enabling allows the user to remove the touch panel if it is accidentally put into the device. To
release the touch panel from the Wall Charging Station:
1. Press the Security Release button.
2. A password keypad will pop up on the MVP-5200i screen. Enter a password in the password keypad
and press Enter.
3. Wait for the Wall Charging Station to pivot the touch panel away from the wall.
4. The device will remain in the ejected position until the MVP-5200i is removed. Wait until the
device’s ejection door has completely withdrawn before re-installing the MVP-5200i.
Recharging
To recharge the MVP-5200i:
1. Slide the device into the Wall Charging Station cradle bottom-first and make sure the device is fully
seated in the Charging Station.
2. Press the top of the MVP-5200i back until it clicks. The touch panel is now locked into the Charging
Station, and the station will automatically charge the device’s battery. (Please refer to the Battery
Settings Page section on page 60 to check on the battery charge status.)
3. To release the touch panel, unlock the touch panel and wait for the Wall Charging Station to pivot
the touch panel away from the wall.
Unique passwords may be entered for up to four unique users as well as the
administrator. For more information on setting passwords, please refer to the
Password Settings Page section on page 90.