AMX MVP-5200i Computer Monitor User Manual


 
Setup Pages
59
MVP-5200i Modero Viewpoint Widescreen Touch Panel
WAV files - Supported sample rates
The following sample rates for WAV files are supported by MVP-5200i panels:
Audio Settings Page (Cont.)
Analog
Line In Level: Adjusts the volume level of any analog signal coming into the device:
Use the Up/Down buttons to adjust the input level (range = 0 - 100)
The Line In Level bargraph indicates the current input level. Press the
bargraph to the left or right of the graph marker to adjust the volume level in
one-percent increments (range 0 - 100), or press the bargraph and hold to
move the graph marker to the desired level.
The Mute button mutes the line input.
Intercom
Mic Level: Adjusts the volume level on the intercom’s microphone:
Use the Up/Down buttons to adjust the microphone level (range = 0 - 100).
Press the bargraph to the left or right of the graph marker to adjust the
volume level in one-percent increments (range 0 - 100), or press the
bargraph and hold to move the graph marker to the desired level.
Intercom Volume: Sets the volume level for intercom calls from another MVP-5200i:
Use the Up/Down buttons to adjust the Line-In volume level (range = 0 - 100).
The Line-In Level bargraph indicates the current Line-In level. Press the
bargraph to the left or right of the graph marker to adjust the volume level in
one-percent increments (range 0 - 100), or press the bargraph and hold to
move the graph marker to the desired level.
The Mute button mutes the Line-In volume.
Audio Output
Audio Output: Enables USB headphone output.
Supported WAV Sample Rates
48000 Hz 16000 Hz
44100 Hz 12000 Hz
32000 Hz 11025 Hz
24000 Hz 8000 Hz
22050 Hz