Filter
Top Products
Configuring Communication
33
MVP-5200i Modero Viewpoint Widescreen Touch Panel
8. Within the WEP Passphrase keyboard (FIG. 27), enter a character string or word (such as
AMXPanel) and press Done when finished.
For example, enter the word AMXPanel using a 128-bit hex digit encryption. After pressing
Done, the on-screen Current Key field displays a long string of characters, separated by
colons, which represents the encryption key equivalent to the word AMXPanel.
This series of hex digits (26 hex digits for a 128-bit encryption key) should be entered as the
Current Key into both the WAP and onto other communicating Modero panels by using the
WEP Key dialog (FIG. 28).
9. Write down this Current Key string value for later entry into the WAP’s WEP Key field (typically
entered without colons) and into other communicating panel’s Current Key field.
10. If entering a Current Key generated either by the target WAP or another Modero panel,
within the WEP Keys section, touch the Key # button to launch the WEP Key # keyboard, enter the
characters and press Done when finished.
This Key value corresponds to the Default WEP Key number used on the Wireless Access
Point and selected in the Default Key field.
11. The remaining Current Key and Authentication fields are greyed-out and cannot be altered by the
user.
FIG. 27 WEP Passphrase Keyboard
FIG. 28 WEP Key # Keyboard
If the target Wireless Access Point does not support passphrase key generation and
has previously been setup with a manually entered WEP KEY, that same WEP key
must be manually entered on the panel.