Filter
Top Products
4.5.6 SPORT0 (P9)
SPORT0 is connected to a 20-pin connector. The pinout for this connector can be
found in APPENDIX B: SCHEMATIC. Contact AMP for pricing and availability
on these connectors.
Part Description Manufacturer Part Number
20 position AMPMODU system
50 receptacle (P9)
AMP 104069-1
Mating Connectors
20 position AMPMODU system
20 connector
AMP 2-487937-0
20 position AMPMODU system
20 connector (w/o lock)
AMP 2-487938-0
Flexible film contacts (20 per
connector)
AMP 487547-1
Mating Assembly
Straight-through assembly with
locking connector on each end
Gopher
Electronics
DRFFC10X7RHU-
RHU5
4.5.7 Power Connector (P10)
The power connector provides all of the power necessary to operate the EZ-KIT
Lite board.
Part Description Manufacturer Part Number
Switchcraft RAPC712 2.5mm Power Jack (P10)
Digi-key SC1152-ND
Mating Power Supply (shipped with EZ-KIT Lite)
7.5V Power Supply GlobTek TR9CC2000LCP-Y
4.6 Specifications
This section provides the requirements for powering the board and the mechanical
dimensions of the board.
ADSP-21535 EZ-KIT Lite Evaluation System Manual
4-14