Filter
Top Products
Contents
Smart-UPS VT ® 10-40 kVA 380/400/415 V, 208/220 V, 200/208 V Battery Installation
i
Safety ............................................................................... 1
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Prepare for Floor-Anchoring (optional) ........................ 2
System arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Hole positions for a stand-alone UPS enclosure with L-shaped
anchoring brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Hole positions for up to four UPS units in parallel with U-shaped
anchoring brackets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Prepare for Cables .......................................................... 5
Remove the front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Remove the top cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Remove the cable landing cover and bottom plates . . . . . . . . . . . . 6
Remove the XR Battery Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Anchor the UPS and additional XR Battery or
UPS Enclosure(s) (optional). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Run the Cables .............................................................. 11
Connect Power in Installations with Busbars . . . . . . . . . . . . . . . . . 11
Install isolators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Install busbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Connect Power in Installations with Cables. . . . . . . . . . . . . . . . . . . 16
Install power cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Connect Communication Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Connect the EPO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Connect the EPO to the UPS and the XR Battery Enclosure . . . . 19