Filter
Top Products
3Smart-UPS VT ® 10-40 kVA 380/400/415 V, 208/220 V, 200/208 V Battery Installation
Hole positions for a stand-alone UPS enclosure with L-shaped anchoring brackets
Note: Recommended minimum number of screws per enclosure for the L-shaped brackets is
four; one in each corner. Recommended floor bolt size: M8.
Model width: 352 mm (13.85 in) and 523 mm (20.59 in).
Note: Rear service clearance must comply with applicable national and local codes. 600 mm
(23.6 in) is recommended.
523 mm (20.59 in)
352 mm (13.85 in ) enclosure
Conduit box (if applicable)
Floor anchoring hole
Minimum rear
clearance:
100 mm (3.93 in)