Filter
Top Products
User Manual version 2305
APOLLO 120/150 III
7-118
u ADVANCED DRAM CONTROL 1 / 2 SETTINGS
The first chipset settings deal with CPU access to dynamic
random access memory (DRAM). The default timings have
been carefully chosen and should only be altered if data is
being lost. Such a scenario might well occur if your system
had mixed speed DRAM chips installed so that greater delays
may be required to preserve the integrity of the data held in
the slower memory chips.
u AUTO CONFIGURATION
This item will automatically configure the chipset timing. You
may select 'manual' to set up following gray items by your
specific need.
The choice: Manual, Auto, 100MHz or 133MHZ.
u SDRAM RAS ACTIVE TIME
This item defines SDRAM ACT to PRE command period.
The Choice: 6T, 7T, 5T, 4T.
u SDRAM RAS Precharge Time
This item defines SDRAM PRE to ACT command period.
The Choice: 3T, 2T, 4T, Reserved.
u RAS TO CAS DELAY
This item defines SDRAM ACT to Read/Write command
period.
The choice: 3T, 2T, 4T, Reserved.
u DRAM BACKGROUND COMMAND
This item is lead-off time control for DRAM background
command. When select 'Delay 1T', background commands
are issued 1 clock behind memory address (MA) been issued.
When select 'Normal', background command and MA are
issued at the same time.
The choice: Delay 1T or Normal.