Filter
Top Products
User Manual version 2305
APOLLO 120/150 III
7-138
7.4.12. User Password
The USER PASSWORD is used to set the password. To
change the password, select this option from the main menu
and press <Enter>.
If the CMOS does not work properly or the USER
PASSWORD option is selected for the first time, then a
default password is stored in the ROM. The following
message will appear on the screen;
Enter Password
Press <Enter>.
If the CMOS is working properly or the USER PASSWORD
option is selected to change the default password, then the
current password (the ROM password or the use-defined
password) stored in the ROM needs to be entered first. The
following message will appear on the screen;
Confirm Password
Enter the current password and press <Enter>.
After pressing <Enter>, then the new password (8 characters
at most) can be entered now. The new password will be
stored in the CMOS.
Please note that to enable this option, either Setup or
System is to be selected from the ADVANCED BIOS
FEATRUES first.