Filter
Top Products
MacBook (13-inch) Additional Procedures — Mitsumi Keycaps — 306
hinge mechanism and one stabilizer bar; whereas the ISO and JIS Return keycap has no hinge
mechanism and three stabilizer bars.
Important Tips:
Before installing a new keycap, make sure
The clips on the underside of the keycap are not broken or bent.
The hinge mechanism operates smoothly.
The stabilizer bar is fully snapped into place
The hinge mechanism is closed and slid farthest from the rubber dome before lowering the
keycap over the keyboard well.
Removing and Replacing a Square Key
1. If a key needs to be removed (for example, if a key is sticking when pressed), pry it up from the
top.
2. Because adhesive is used under the top case, closely inspect the case for any adhesive that
may have built up under the keycap. Lift away any built-up adhesive using ne-point tweezers.
•
•
•
•