Filter
Top Products
Starting up from a CD-ROM disc
To i ni tialize, test, or repair a hard disk, or to install system software on a hard
disk, you need to start up your computer from another disk. If your computer
has a CD-ROM drive, you can start up your computer using the CD-ROM
disc containing system software that came with the computer.
To st ar t up the computer using the CD-ROM disc, either use a control panel
to set the CD-ROM drive as your startup drive, or follow these steps:
1 Turn your computer on.
2Immediately press the Open/Close button on your CD-ROM drive, and quickly insert the
CD-ROM disc containing system software into the drive.
3Immediately press the C key on your keyboard.
Continue to hold down the key until you see the “Welcome to Macintosh”
message.
If a blinking question mark appears, or if the computer starts up from your
hard disk: You did not insert the CD-ROM disc quickly enough for the
computer to recognize it as a startup disk. Follow these steps:
1Shut down your computer.
The CD-ROM disc will remain in the CD-ROM drive.
2 Turn the computer on.
3Immediately press the C key on the keyboard.
Continue to hold down the key until you see the “Welcome to Macintosh”
message.
97
Troubleshooting