Filter
Top Products
56 Chapter 4 Enhancing Your Computer
3 If you already have a memory card installed in the slot, remove it. Spread the tabs in
the slot away from the notches in the memory card. The card should pop up slightly.
4 Insert the new memory card into the slot at a 30-degree angle. Push the card to seat it
fully into the slot.
5 Press down on the memory card to lock it in place.
If the memory card does not latch, do not force the card down. Try reinserting the card
to make sure it is fully seated.
30
O
LL2541Q7X.book Page 56 Wednesday, March 3, 2004 2:52 PM