Filter
Top Products
Accessing the Device
Page 3-2
❏ Type the highest (last) IP address on your network
in the Hi IP Address field.
❏ Select New in the Discovery Mode field to create a
new map, or select Append to attach this map to the
map that is stored in your system’s buffer (if any).
5 Click Apply.
IntraSpection “discovers” and builds a map of your net-
work. The map contains icons which represent each SNMP
device on the network. Figure 3-1 is an example map.
Figure 3-1 Discovered network map
6 Click once on the SuperStack II Switch 1000’s device
icon.
∆ Note: The SuperStack II Switch 1000’s device
icon is labeled “3Com” and has the device’s IP
address directly below it.
The Device Page for the selected SuperStack II Switch 1000
appears (see Figure 3-2 on page 3-3).
For information on the Device Page’s components, see
“Device Page Components” on page 3-3.
For information on performing basic management func-
tions, see “Performing Basic Management Functions” on
page 4-1.
book Page 2 Thursday, September 4, 1997 3:47 PM