Filter
Top Products
VLAN
Page 5-6
Figure 5-5 Selecting a port button
6 While holding down the mouse button, drag the dot
onto the VLAN group button that you want to assign
the port to, then release the mouse button. See
Figure 5-6.
Figure 5-6 Assigning a port to a VLAN group
The port is now assigned to that VLAN group. The port’s
button and status LED box will be aligned with the
VLAN group number. See Figure 5-7.
Port Button Selection;
click on the port button and hold down
the left mouse button until a dot appears
next to the screen’s pointer
drag the button
to the VLAN group
drop the button
on the VLAN group
book Page 6 Thursday, September 4, 1997 3:47 PM