Filter
Top Products
Menus
Page 6-6
Identify
This menu allows you to view and configure identification information
for the SuperStack II Switch 1000.
Table 6-4 describes each field in the Identify menu.
∆ Note: For instructions on using this menu, see “Config-
uring Identification Information” on page 4-6.
Table 6-4 Identify Menu
Field Description
Physical Address Read-only field; displays the device’s hardware
address.
Object ID Read-only field; displays the device’s SNMP identify-
ing number.
Description Read-only field; displays a description of the device.
Name Configurable field; assigns a name to the device.
Note:
A maximum of 254 characters, including
spaces, is allowed.
Location Configurable field; assigns a physical location to the
device.
Note:
A maximum of 254 characters, including
spaces, is allowed.
Contact Configurable field; assigns a name of the person
responsible for the device.
Note:
A maximum of 254 characters, including
spaces, is allowed.
Up Time Read-only field; displays the amount of time the
device has been operational since the last time it was
off-line.
Interfaces Read-only field; displays the number of network inter-
faces present on the device.
book Page 6 Thursday, September 4, 1997 3:47 PM