Filter
Top Products
Graph
Page 6-19
Field Description
Statistics
(continued)
Group Statistics
❏ Readable Frames — displays the total number
of good or readable frames (frames without
error).
❏ Unicast Frames — displays the number of
frames seen by the card that is addressed to a
unicast (non-card) address.
❏ Broadcast Frames — displays the total num-
ber of frames that were successfully received
and were directed to the broadcast group
address.
❏ FCS Errors — displays the number of frames
that failed Cyclic Redundancy Check (CRC).
❏ Alignment Errors — displays the number of
frames that were an integral number of octets
in length and did not pass the FCS check.
❏ FramesTooLong — displays the number of
frames that exceeded 1,518 bytes.
❏ Short Events — displays the number of data
bursts, (data is less than 10 bytes in length).
❏ Runts — displays the number of frames
shorter than 64 bytes.
❏ Auto Partitions — displays the number of
times the device has automatically partitioned
a port.
❏ Total Errors — displays the total number of
errors which have occurred on all ports on all
groups in this device.
Port Statistics
❏ Readable Frames — displays the total number
of good or readable frames (frames without
error).
❏ Transmitted Frames — displays the number of
frames (including error frames) which were
transmitted by ports in this workgroup.
❏ Filtered Frames — displays the total number
of frames within a workgroup that were fil-
tered because the destination station was on
the same segment (port) as the source station.
book Page 19 Thursday, September 4, 1997 3:47 PM