Filter
Top Products
Performing a Software Upgrade
Page 4-7
Performing a Software Upgrade
The SuperStack II Switch 1000’s software can be upgraded via
IntraSpection.
To upgrade the device’s software:
1 Click Upgrade.
The Software Upgrade table appears, similar to Figure 4-6.
Figure 4-6 Software Upgrade table
2 Type the software’s file name and network path in the
Download Filename field.
3 Type the server’s IP address where the software file
resides in the Server Address field.
4 Click Apply.
5 Initiate the downloading via one of the following two
methods:
❏ Physically power the device off and then on.
❏ Open the Slots menu, click once on the row
entry, click Modify, open the Action drop-
down menu and select Reset, then click
Apply.
book Page 7 Thursday, September 4, 1997 3:47 PM