Filter
Top Products
FriendlyNET FM2008/2009
12 User’s Manual
The following table provides descriptions of the LEDs statuses and
meanings. These LEDs provide a real-time indication of systematic
operation status.
LED Status Color Description
Power
On Green Power On
On Green The port is operating at 100Mbps
100Mbps
Off
The port is operating at 10Mbps, or no
device is attached
On Green
A valid link has been established on
the port
Blinking Green
The port is receiving or transmitting
data
Link/
Activity
Off No device attached
On Yellow
The port is operating in full-duplex
mode. This LED is always lit on the
fiber port
Blinking Yellow Packet collision is occurring on the port
Full
Duplex
Off
Half-duplex mode or no device
attached
Table 2-1. The description of LED Indicators
Rear Panel
The console port and 3-pronged power plug are located at the rear
panel of the switch as shown in figure 2-7. The switch will work with
AC in the ranges 100–240V AC, 50–60Hz.
Figure 2-7. The rear panel of the switch