Filter
Top Products
FriendlyNET FM2008/2009
64 User’s Manual
4.4.4 Port Controls
From this page you can configure the following parameters:
• State: Disable or enable each port
• Auto Negotiation: Disable or enable auto negotiation for each
port
• Speed: Set port speed (100Mbps or 10Mbps) on ports 1-8; port
9 is 100Mbps only
• Duplex: Set full-duplex or half-duplex mode for each port
• Flow Control: Enable or disable flow control for each port
4.4.5 Trunking
Trunking provides a standardized means for exchanging information
between multiple devices on a link. This allows their Link Aggregation
Control to reach an agreement on the identity of the Link Aggregation
Group, move the link to that Link Aggregation Group, and enable its
transmission and reception functions in an orderly manner. Trunk up
to eight consecutive ports into a single dedicated connection. This
feature can expand bandwidth to a device on the network. LACP
operation requires full-duplex mode. For more detailed information,
please refer to IEEE 802.3ad.