Filter
Top Products
FriendlyNET FM2008/2009
52 User’s Manual
3.5 Reboot Switch
Default: Resets the switch to the default configuration.
Restart: Reboots the switch.
3.6 Xmodem Upgrade
You can load an image file via an Xmodem upgrade during a system
restart. Follow the steps below to perform an Xmodem upgrade via
the console port.
1. Press the X key to start upgrading for Xmodem.
2. Disconnect the terminal and modify the baud rate to 57600bps,
then reconnect to the terminal.