Filter
Top Products
FriendlyNET FM2008/2009
66 User’s Manual
5. Select the ports to join the trunking group
6. If LACP is enabled, you can configure the LACP Active/Passive
status on each port.
7. Click Apply.
4.4.5.2 Aggregator Information
When setting the LACP aggregator, you can view the related
information by clicking Aggregator Information.
4.4.5.3 State Activity
Click on
State Activity
to configure each port to automatically send LACP
protocol packets.
Active (Status box selected): Check the box in each port to have that
port automatically send the LACP protocol packets.
Passive (
Status
box unselected): With the box unchecked, the port
will not automatically send the LACP protocol packets, and responds
only if it receives LACP protocol packets from the opposite device.
A link having either two active LACP ports or one active port can
perform dynamic LACP trunking.