Filter
Top Products
ASUS A7V400-MX SEASUS A7V400-MX SE
ASUS A7V400-MX SEASUS A7V400-MX SE
ASUS A7V400-MX SE
1-251-25
1-251-25
1-25
9.9.
9.9.
9.
Digital audio connector (4-1 pin SPDIF)Digital audio connector (4-1 pin SPDIF)
Digital audio connector (4-1 pin SPDIF)Digital audio connector (4-1 pin SPDIF)
Digital audio connector (4-1 pin SPDIF)
This connector is for an additional Sony/Philips Digital Interface
(S/PDIF) port(s). Connect the S/PDIF out module cable to this
connector, then install the module to a slot opening at the back of the
system chassis.
10.10.
10.10.
10.
ATX power connector (20-pin ATXPWR)ATX power connector (20-pin ATXPWR)
ATX power connector (20-pin ATXPWR)ATX power connector (20-pin ATXPWR)
ATX power connector (20-pin ATXPWR)
This connector is for the 20-pin ATX power supply plug. The plug from
the power supply is designed to fit this connector in only one
orientation. Find the proper orientation and push down firmly until the
connector completely fit.
A7V400-MX SE
A7V400-MX SE ATX power connector
ATXPWR
+3.3VDC
-12.0VDC
COM
PS_ON#
COM
COM
COM
-5.0VDC
+5.0VDC
+5.0VDC
PWR_OK
+12.0VDC
+3.3VDC
+3.3VDC
COM
+5.0VDC
COM
+5.0VDC
COM
+5VSB
The S/PDIF module is purchased separately.
A7V400-MX SE
A7V400-MX SE Digital audio connector
+5V
SPDIFOUT
GND
SPDIF
If you will need to replace the power supply in the future, make sure that
your new ATX 12V power supply can provide 8 A on the +12 V lead and
at least 1 A on the +5 V standby lead (+5VSB). The minimum
recommended wattage is 230W, or 300W for a fully configured system.
The system may become unstable and may experience difficulty
powering up if the power supply is inadequate.