Filter
Top Products
2-302-30
2-302-30
2-30
Chapter 2: BIOS setupChapter 2: BIOS setup
Chapter 2: BIOS setupChapter 2: BIOS setup
Chapter 2: BIOS setup
Bootup Num-lock [On]Bootup Num-lock [On]
Bootup Num-lock [On]Bootup Num-lock [On]
Bootup Num-lock [On]
Allows you to select the power-on state for the keyboard NumLock key.
Configuration options: [Off] [On]
Halt On [All Errors]Halt On [All Errors]
Halt On [All Errors]Halt On [All Errors]
Halt On [All Errors]
Sets the system to halt on errors according to the system functions
specified in each option. Configuration options: [All Errors]
[No Errors] [All, But Keyboard] [All, But Diskette] [All, But Disk/Key]
2.7.62.7.6
2.7.62.7.6
2.7.6
SecuritySecurity
SecuritySecurity
Security
This menu allows you to adjust the system security settings.
Boot Settings Configuration Select Menu
Item Specific Help
Supervisor password
controls full access.
Press <Enter> to
change password.
Supervisor Password Clear
User Password Clear
Password Check [Setup]
F1 : Help
↑↑
↑↑
↑
↓↓
↓↓
↓ : Select Item -/+ : Change Value F5 : Setup Defaults
ESC : Exit
→←→←
→←→←
→←: Select Menu Enter : Select Submenu F10: Save and Exit
Supervisor PasswordSupervisor Password
Supervisor PasswordSupervisor Password
Supervisor Password
User PaswordUser Pasword
User PaswordUser Pasword
User Pasword
Allows you to set the supervisor or user password.
To set a password:
1. Select
Supervisor Password Supervisor Password
Supervisor Password Supervisor Password
Supervisor Password or
User PasswordUser Password
User PasswordUser Password
User Password, then press
<Enter>.
2. Enter the password using a combination of eight (8) alpha-numeric
characters, then press <Enter>.
3. When prompted, re-type the same password, then press <Enter> to
confirm. When the password is activated, the password item value
now shows
SetSet
SetSet
Set.