Filter
Top Products
ASUS A7V400-MX SEASUS A7V400-MX SE
ASUS A7V400-MX SEASUS A7V400-MX SE
ASUS A7V400-MX SE
2-252-25
2-252-25
2-25
PS2MS Wakeup from S3/S4/S5 [Disabled]PS2MS Wakeup from S3/S4/S5 [Disabled]
PS2MS Wakeup from S3/S4/S5 [Disabled]PS2MS Wakeup from S3/S4/S5 [Disabled]
PS2MS Wakeup from S3/S4/S5 [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse
to turn on the system. This requires an ATX power supply that provides at
least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]
USB Resume from S3/S4 [Disabled]USB Resume from S3/S4 [Disabled]
USB Resume from S3/S4 [Disabled]USB Resume from S3/S4 [Disabled]
USB Resume from S3/S4 [Disabled]
Configuration options: [Disabled] [Enabled]
Power On By PCI Devices [Disabled]Power On By PCI Devices [Disabled]
Power On By PCI Devices [Disabled]Power On By PCI Devices [Disabled]
Power On By PCI Devices [Disabled]
When set to [Enabled], this parameter allows you to turn on the system
through a PCI LAN or modem card. This feature requires an ATX power
supply that provides at least 1 A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Modem Ring Resume [Disabled]Modem Ring Resume [Disabled]
Modem Ring Resume [Disabled]Modem Ring Resume [Disabled]
Modem Ring Resume [Disabled]
When [Enabled] the computer powers up when the external modem
receives a call while the computer is in soft-off mode.
Configuration options: [Disabled] [Enabled]
Power On By RTC Alarm [Disabled]Power On By RTC Alarm [Disabled]
Power On By RTC Alarm [Disabled]Power On By RTC Alarm [Disabled]
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this
item is enabled, the Date and Resume Time fields are activated for manual
setup. Configuration options: [Disabled] [Enabled]
Video Off Option [Suspend -> Off ]Video Off Option [Suspend -> Off ]
Video Off Option [Suspend -> Off ]Video Off Option [Suspend -> Off ]
Video Off Option [Suspend -> Off ]
Determines when to activate the video off feature for monitor power
management. Configuration options: [Always On] [Suspend -> Off]
PWR Button < 4 Sec [Instant-Off]PWR Button < 4 Sec [Instant-Off]
PWR Button < 4 Sec [Instant-Off]PWR Button < 4 Sec [Instant-Off]
PWR Button < 4 Sec [Instant-Off]
When set to [Instant-off], the ATX power button can be used as a normal
system power-off button when pressed for less than 4 seconds. [Suspend]
allows the button to have a dual function where pressing less than 4
seconds puts the system in sleep mode. Regardless of the setting, pressing
the ATX power button for more than 4 seconds powers off the system.
Configuration options: [Suspend] [Instant-off]
Restore on AC Power Loss [Last State]Restore on AC Power Loss [Last State]
Restore on AC Power Loss [Last State]Restore on AC Power Loss [Last State]
Restore on AC Power Loss [Last State]
Allows you to set whether or not to power the system after an AC power
loss. [Off] leaves your system off, while [On] powers up the system.
Setting to [Last State] puts the system back to the state it was before
the AC power interruption. Configuration options: [Last State] [Power On]
[Power Off]