Filter
Top Products
ASUS A7V400-MX SEASUS A7V400-MX SE
ASUS A7V400-MX SEASUS A7V400-MX SE
ASUS A7V400-MX SE
2-312-31
2-312-31
2-31
To clear the password:
1. Select either the
Supervisor Password Supervisor Password
Supervisor Password Supervisor Password
Supervisor Password or
User PasswordUser Password
User PasswordUser Password
User Password, then
press <Enter> twice. A
Password Disabled! Password Disabled!
Password Disabled! Password Disabled!
Password Disabled! message appears on
screen to indicate that the password has been cleared.
2. Press any key to continue. The password item value now shows
Clear.Clear.
Clear.Clear.
Clear.
A note about passwordsA note about passwords
A note about passwordsA note about passwords
A note about passwords
The BIOS Setup program allows you to specify passwords in the Boot
menu. These passwords control access to the BIOS during system
startup. The BIOS Setup program allows you to specify two different
passwords: a
Supervisor Password Supervisor Password
Supervisor Password Supervisor Password
Supervisor Password and a
User PasswordUser Password
User PasswordUser Password
User Password. If you
did not set a Supervisor Password, anyone can access the BIOS Setup.
If you did, the Supervisor Password is required before entering the BIOS
Setup and gain full access to the configuration fields.
Forgot the password?Forgot the password?
Forgot the password?Forgot the password?
Forgot the password?
If you forget your password, you can clear it by erasing the CMOS Real
Time Clock (RTC) RAM. The RAM data containing the password
information is powered by the onboard button cell battery. If you need
to erase the CMOS RAM, refer to section “1.11 Switch and Jumpers” for
instructions.
Password Check [Setup]Password Check [Setup]
Password Check [Setup]Password Check [Setup]
Password Check [Setup]
Requires users to enter the password before entering the BIOS setup or the
operating system. Select [Setup] to require the password before entering
the BIOS Setup. Select [System] to require the password before entering
the operating system. Configuration options: [Setup] [System]